What are the official SOLIDWORKS workstation requirements?
The official SOLIDWORKS workstation requirements call for 64-bit Windows 11 or 10 on an x86_64 processor. Memory starts at 16GB, with 32GB recommended. Graphics must be certified cards with certified drivers, on SSD storage. Check it per release.
Requirement | What Dassault lists |
Operating system | Windows 11 or Windows 10, 64-bit |
Processor | x86_64 (Intel 64 or AMD64) |
Memory | 16GB, with 32GB recommended |
Graphics | Certified cards and drivers |
Storage | SSD drives recommended |
Not supported | Windows Home editions, Macs running Boot Camp |
Two lines on that page catch buyers out. Windows 10 support ends with SOLIDWORKS 2025 SP5, so any newer release needs Windows 11. Home editions of Windows are not supported at all. A cheaper machine with Windows Home will cost you a licence upgrade before it opens a single part.
Why brief your assemblies before choosing a workstation for SolidWorks?
A brief turns "we need a fast machine" into numbers a supplier can quote against, for every workstation for SolidWorks you plan to order. The brief records your largest assembly and slowest drawings, plus the release and every add-in in use. Two engineers with the same job title can need very different hardware, and the brief shows that difference before money is spent.
Write down these facts for each user group:
Largest assembly: component count and file size on disk
Drawings with many sheets or detailed views
Software version: SOLIDWORKS release and service pack
Simulation add-ins and other add-ins in daily use, such as Flow Simulation, Visualize, or PDM
How many files people keep open at once
Where the files live: local drive, PDM vault, or a network share
Count users by group. A team of 12 might hold 9 designers on parts and small assemblies, 2 engineers running simulation studies, and 1 person producing renders. That split means two or three builds.
How do assembly size and add-ins change the hardware?
Assembly size drives memory first, because SOLIDWORKS holds open models in RAM. Add-ins shift the load elsewhere. Simulation solvers lean on processor cores and memory, while Visualize leans on the graphics card. Daily modelling sits in between, since feature rebuilds work through the tree in order and reward fast individual cores.
Use these bands as a starting point for the brief, then confirm them with a pilot:
Workload profile | Memory to start from | Graphics | What to watch |
Parts and small assemblies | 32GB | Certified entry workstation card | Clock speed of each core |
Large assemblies and detailed drawings | 64GB | Certified mid-range card | Open and rebuild times |
Simulation or Flow studies | 64GB or more | Certified mid-range card | Core count and solve time |
Visualize rendering | 32 to 64GB | Certified high-end card | Render time per image |
Simulation users need more. Check the SolidWorks workstation requirements for their add-ins too. The guide to a workstation for engineering simulation covers solver cases and licensed core counts in detail, and the 3D rendering workstation guide covers render-heavy users.
Why do the certified hardware list and graphics driver matter?
Each SOLIDWORKS release is tested against specific graphics cards and driver versions. A certified pairing has been checked for display errors and crashes, plus missing visual features. An uncertified gaming card may run, yet it leaves you without a supported setup when the viewport freezes during a design review with a client on the call.
Ask the supplier three things before the machine ships:
Is the graphics card on the certified list for our release?
Is the certified driver version installed, and not the newest consumer driver?
Will a replacement unit arrive with the same card and driver?
The third question matters on a rented fleet. Our CAD workstations come with ISV-grade graphics, and a failed unit is swapped the same business day in its 8 hub cities. A swap that arrives with a different driver can undo a week of tuning, so put the driver version in the device schedule.
How should you pilot test a workstation for SolidWorks?
Run a pilot on one machine with your own files before you order for the team. A pilot of 5 working days is long enough to cover a full design cycle for most teams. Use your largest assembly and your slowest drawing. Time the same tasks on both machines.
A simple pilot plan:
Open the largest assembly and time it
Rebuild it after a change near the top of the tree
Update and save the slowest drawing
Run one representative Simulation study, if your team uses it
Check files in and out of PDM over your normal network
Log the results in a shared sheet so the whole team can compare them. If the open time drops from 4 minutes to 90 seconds, the case for the build writes itself. No change points to the network share or vault server.
Should you rent, lease, or buy a SolidWorks workstation?
Match the workstation for SolidWorks to how long the need lasts. A project of 3 to 9 months suits monthly rental, because the workstation goes back when the project closes. A permanent design team suits a lease of 2 to 5 years at a fixed monthly amount.
Buying makes sense when your IT team already supports workstations in-house, keeps spare parts on the shelf, and expects to use the same machines for 4 years or more.
The Companies Act Schedule II gives end-user computers a 3-year useful life. A workstation bought for one 6-month contract therefore sits on the books long after the work ends. C Prompt offers servers and workstations on monthly rent, on lease, and fully managed. For the wider rent-or-buy picture, read the guide to workstation vs desktop choices.
Frequently asked questions
How much RAM does SolidWorks need?
The official minimum is 16GB, with 32GB recommended. Treat 32GB as the real floor for daily work. Teams with large assemblies, detailed drawings, or Simulation studies usually start at 64GB. Size from your largest assembly in the brief, then confirm with a 5-day pilot on your own files.
Can SolidWorks run on a gaming graphics card?
Gaming cards can run SOLIDWORKS, but they are not on the certified list, so display faults fall outside a supported setup and take longer to fix. For a team of 5 or more designers, certified workstation cards remove a steady source of lost hours.
Does SolidWorks run on a Mac?
Not natively. SOLIDWORKS needs 64-bit Windows on an x86_64 processor, and Macs running Windows through Boot Camp are not supported. Plan a Windows workstation for every SolidWorks user. Designers who prefer a Mac for other work can keep one, with a 24-inch or 27-inch Windows desk setup beside it.
Is an SSD necessary for a SolidWorks workstation?
Yes. SSD drives are on Dassault's recommended list, since large assemblies read and write many files on every open, save, or rebuild. Keep at least 30% of the SSD free, since a nearly full drive slows down over a long project.
How fast can a rented CAD workstation be delivered?
In the 8 hub cities, delivery runs within 24 hours of order confirmation. Elsewhere in India, plan for about 2 days. A pilot unit can be on a desk within the week, which lets the team test before committing to a 3-month or longer order.
The right workstation for SolidWorks starts with a one-page brief. Write down your largest assembly and add-ins with the release number. Test one machine for a week, then order the build that cut your open and rebuild times.

